Showing 16–30 of 37 results

  • Binder – Drying and Heating Chambers – Series FD Classic.Line – With forced convection

    A BINDER FD series heating oven is always used when fast drying and sterilization is required. Thanks to its fully homogeneous temperature distribution, quick dynamics and powerful fan, this heating oven saves valuable time.

    Key Features

    • Uniform drying conditions thanks to APT.line™ technology
    • Identical test conditions throughout the chamber interior independent of sample size and quantity
    • Outstanding thermal insulation saves operation costs

    Heating Chambers With A Wide Range of Applications

    BINDER heating chambers meet the requirements for a scientific laboratory test chamber in every respect, with their outstanding temperature accuracy, homogeneous heat distribution, and residue-free drying being the most impressive highlights. Characterized by a robust and durable quality, these units also comply with key safety standards, including for drying flammable substances. All of the parts in BINDER heating chambers can be cleaned with ease, reducing the risk of undesirable contamination to a minimum.

    With BINDER heating chambers, you can rest safe in the knowledge that you will be getting top quality and ease of operation. They can be individually programmed, so they can be adjusted precisely to suit different tasks and projects. Consistent test conditions provide high levels of process reliability. The extensive choice of program functions makes these heating chambers suitable for a wide range of applications within industry, science, and research.

  • Binder – Drying and Heating Chambers – Series FD-S Solid.Line – With forced convection

    The new products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance.

    Key Features

    • Easy handling
    • Accurate temperature control
    • Simple and ergonomic door opening
     

     

  • Binder – Drying and Heating Chambers – Series FED Avantgarde.Line – With forced convection and enhanced timer functions

    BINDER heating chambers of the FED Avantgarde.Line series provide almost unlimited capacity and are particularly adaptable. With advanced timing functions and a controllable fan, temperature and convection conditions are easily controlled.

    Benefits

    • Best energy efficiency on the market
    • Excellent temporal and spatial temperature accuracy
    • USB connection for recording data
    • Temperature range up to 300 °C

    BINDER heating chambers with forced convection are available in a range of different versions. The Classic.Line FED series features heating chambers with forced convection and enhanced timer functions that promise high quality and reliability. However, it is in their performance that these heating chambers really impress. Not to mention that they can be flexibly adapted to suit specific requirements. Heating chambers with forced convection are ideal for a range of tests, for example, as well as being the top choice for drying, sterilization, and storage in industrial and research laboratories. Heating chambers with forced convection in the FED series operate within a temperature range of between 5 °C and 300 °C. They feature the patented APT.line™ preheating chamber technology that enables highly homogeneous temperature control with forced convection. Test conditions are consistent across the entire usable space, regardless of the amount or size of the sample. The FED series heating chambers come with enhanced timer functions, which can be used to control temperature parameters and convection conditions as required, and the fan can be controlled digitally.

     

    Impressively Versatile Heating Chambers With Forced Convection From BINDER

    BINDER heating chambers with forced convection and enhanced timer functions are well-suited to a wide range of industry, research, science, and quality assurance applications. They combine high levels of functionality, performance, and quality with excellent usability. The modern design of these innovative heating chambers makes for a further advantage. The FED series is made up of impressively versatile units that meet the requirements of modern laboratories and guarantee maximum process reliability.

  • Binder – Drying and Heating Chambers – Series FED Classic.Line – With forced convection and enhanced timer functions

    BINDER heating chambers of the FED series provide almost unlimited capacity and are particularly adaptable. With advanced timing functions and a controllable fan, temperature and convection conditions are easily controlled.

    Key Features

    • Uniform drying conditions thanks to APT.line™ technology
    • Identical test conditions throughout the chamber interior independent of sample size and quantity
    • Outstanding thermal insulation saves operation costs

    BINDER heating chambers with forced convection are available in a range of different versions. The Classic.Line FED series features heating chambers with forced convection and enhanced timer functions that promise high quality and reliability. However, it is in their performance that these heating chambers really impress. Not to mention that they can be flexibly adapted to suit specific requirements. Heating chambers with forced convection are ideal for a range of tests, for example, as well as being the top choice for drying, sterilization, and storage in industrial and research laboratories. Heating chambers with forced convection in the FED series operate within a temperature range of between 5 °C and 300 °C. They feature the patented APT.line™ preheating chamber technology that enables highly homogeneous temperature control with forced convection. Test conditions are consistent across the entire usable space, regardless of the amount or size of the sample. The FED series heating chambers come with enhanced timer functions, which can be used to control temperature parameters and convection conditions as required, and the fan can be controlled digitally.

     

    Impressively Versatile Heating Chambers With Forced Convection From BINDER

    BINDER heating chambers with forced convection and enhanced timer functions are well-suited to a wide range of industry, research, science, and quality assurance applications. They combine high levels of functionality, performance, and quality with excellent usability. The modern design of these innovative heating chambers makes for a further advantage. The FED series is made up of impressively versatile units that meet the requirements of modern laboratories and guarantee maximum process reliability.

  • Binder – Drying and Heating Chambers – Series FP Classic.Line – With forced convection and program functions

    A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.

    Key Features

    • Uniform drying conditions thanks to APT.line™ technology
    • Identical test conditions throughout the chamber interior independent of sample size and quantity
    • Outstanding thermal insulation saves operation costs
    • Advanced programming options

    Heating Chambers With Forced Convection and Program Functions

    BINDER has a range of heating chambers in different versions, precisely tailored to suit specific requirements and tasks. In its Classic.Line FP series, BINDER has developed extremely complex temperature testing chambers, which also meet high quality standards and offer a broad variety of programming options. The forced convection provides short drying times and fast heating up times, which is a real benefit, especially when chambers are fully loaded.

    BINDER heating chambers with forced convection and program functions in the FP series are powerful and extremely accurate. They can be operated within a temperature range of between 5 °C and 300 °C. Heating chambers in the FP series boast almost unlimited adjustment opportunities, with the option to program temperature cycles, the fan speed setting for each program interval, the weekly program timer, and the real-time clock of the controller.

     

    BINDER Heating Chambers for Impressively Consistent Test Conditions

    Homogeneous temperature distribution is guaranteed in the usable space thanks to the patented APT.line™ preheating chamber technology. The heating chamber’s fan helps maintain the temperature accuracy here. Sample conditions are consistent across the entire usable space, regardless of the amount or size of the sample.

    Alongside their high performance and efficiency, and varied programming options, BINDER’s heating chambers with forced convection are also incredibly user-friendly. All of the unit’s functions are clearly arranged and the settings for them can be adjusted with ease. Cleaning is no hassle at all thanks to the stainless steel finish of the interior, the preheating chamber, and the inner sides of the doors, while a serial interface (RS 422) allows the FP series heating chambers to communicate with computers.

    Ideal for a wide range of industry, research, and quality assurance applications, BINDER temperature testing chambers can meet even the most exacting of demands.

  • Binder – Drying and Heating Chambers – Series M – With forced convection and advanced program functions

    With a maximum of 300 °C and various programming options the M series material test chambers are ideal for material and aging tests. With a high air flow, the powerful fans ensure rapid heating.

    Key Features

    • Uniform drying conditions thanks to APT.line™ technology
    • Identical test conditions throughout the chamber interior independent of sample size and quantity
    • Outstanding thermal insulation saves operation costs
    • Advanced programming options

    Heating Chambers With Forced Convection and Advanced Program Functions

    BINDER heating chambers in the Classic.Line M series are equipped with advanced program functions, allowing the units to be used in a wide range of applications. Whatever they are being used for, they never fall to impress with their high precision and performance. The drying and heating chambers with forced convection are ideally suited for the drying and heat treatment of solid or powdered chamber loads and bulk material with the introduction of heat. They also come highly recommended for drying processes and any tasks within the field of material and aging testing.

     

    Heating Chambers With Forced Convection for High Performance and Ease of Use

    Heating chambers in the M series feature an extremely powerful throughput of air and a programmable exhaust air flap that speeds up the heating up time. Testing temperatures can be maintained with precision at every level and are subject to only minimal spatial fluctuations. It is the patented APT.line™ preheating chamber technology together with the direct and streamlined air flow in the interior that guarantee the high levels of temperature accuracy in terms of space and time. These heating chambers operate within a temperature range of between 5 °C and 300 °C, with the temperature being displayed digitally to the accuracy of a tenth of a degree, and the fan speed can be adjusted on an individual basis.

    BINDER heating chambers in the M series come in different sizes, and a range of optional accessories is also available. Their high performance levels are teamed with incredible ease of handling – all of the unit’s functions are clearly arranged and user-friendly. The simplicity with which all of the parts in the heating chambers can be cleaned is another definite plus that reduces the risk of undesirable contamination to a minimum.

  • Binder – Dynamic Climate Chambers – Series MK – For rapid temperature changes

    The BINDER MK series chamber is suitable for all heat and cold tests between -40 °C and 180 °C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests.

    key Features

    • Homogeneous climate conditions thanks to APT.line™ technology
    • Comprehensive programming and data acquisition
    • Large heated viewing window

    Environmental Simulation Chambers for Rapid Temperature Changes

    BINDER environmental simulation chambers in the MK series are the number one choice for dynamic temperature profiles. Heat and cold tests alike can be performed with precision within these climate chambers. Designed for rapid temperature changes, the environmental simulation chambers can be used within a temperature range of between -40 °C and +180 °C. The patented APT.line™ air flow concept guarantees accurate measured values at every temperature setting – across the entire usable space and even when the climate chambers are fully loaded.

    BINDER environmental simulation chambers in the MK series feature programmable condensation protection for samples. Equipped with a heated viewing window with LED interior lighting, these chambers can be adjusted to suit any requirements with ease using the controller with interval programming. The large access area even makes equipping the chambers nice and convenient.

     

    BINDER Environmental Simulation Chambers for Flexibility and Precision

    The BINDER APT-COM™ 3 Basic Edition communication software and a troubleshooting system with visual and acoustic alarms are also included. These environmental simulation chambers offer maximum flexibility in practice thanks to their stable casters with locking brakes, which enable them to be transported from A to B in no time and then securely locked in position, with the water supply independent of location.

    Dynamic climate chambers from BINDER are suitable for a wide range of applications, including material testing, aging and stress tests, and environmental simulation. Whatever they are tasked with, these units impress with their precision and performance, delivering reliable, norm-compliant test results and providing you with the basis for working with accuracy and success. The opportunities available with these environmental simulation chambers extend well beyond those offered by a standard heating chamber.

  • Binder – Dynamic Climate Chambers – Series MKF – For rapid temperature changes with humidity control

    A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.

    Key Features

    • Homogeneous climate conditions thanks to APT.line™ technology
    • Automatic water and wastewater management
    • Pressure humidification with fast response times
    • Comprehensive programming and data acquisition
    • Large heated viewing window
  • Binder – Dynamic Climate Chambers – Series MKFT – For rapid temperature changes with humidity control

    The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.

    Key Features

    • Homogeneous climate conditions thanks to APT.line™ technology
    • Automatic water and wastewater management
    • Pressure humidification with fast response times
    • Comprehensive programming and data acquisition
    • Large heated viewing window

    BINDER Environmental Simulation Chambers with Humidity Control

    BINDER environmental simulation chambers in the MKFT series are designed for rapid temperature changes and also feature an extended low-temperature range and humidity control. They never fail to impress with their speed of cooling down, high precision, and huge power reserves – even during complex climate tests.

     

    The dynamic climate chambers in the MKFT series operate within a particularly wide temperature range of between -70 °C and 180 °C, and a humidity range of between 10% RH and 98% RH. The digital display here works to the accuracy of a tenth of a degree or a tenth of a percent, respectively.

    Humidity is regulated using a capacitive humidity sensor and steam humidification. There is programmable condensation protection for samples as well as a heated viewing window featuring LED interior lighting. Four zero-voltage relay contacts can also be activated via the MCS controller.

    Environmental Simulation Chambers with Innovative Preheating Chamber Technology

    BINDER environmental simulation chambers feature the patented APT.line™ preheating chamber technology, which is an innovative heating system that ensures homogeneous temperature distribution in the climate chamber interior. At the same time, the »Advanced Preheating Technology« provides exceedingly fast recovery times. As with the environmental simulation chambers in the MKFT series, the APT.line™ preheating chamber technology is used in the majority of BINDER’s climate chambers, allowing for stable operation over extended periods of time, even when the climate chambers are fully loaded.

    BINDER’s dynamic climate chambers in the MKFT series, with humidity control and extended low-temperature range, are available in different versions with interior volumes offering varying capacities. They are perfectly suited to material testing under dynamic conditions, being able to cope with complex temperature profiles while also controlling the humidity levels. With BINDER environmental simulation chambers, innovative technology goes hand in hand with excellent usability.

     
  • Binder – Dynamic Climate Chambers – Series MKT – For rapid temperature changes with extended low temperature range

    Temperature ranges between -70 °C and 180 °C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests.

    key Features

    • Homogeneous climate conditions thanks to APT.line™ technology
    • Comprehensive programming and data acquisition
    • Large heated viewing window

    Environmental Simulation Chambers for Rapid Temperature Changes With Extended Low-Temperature Range

    BINDER environmental simulation chambers in the MKT series are designed for rapid temperature changes and also feature an extended low-temperature range, with chambers operating between -70 °C and 180 °C, and thereby proving suitable for a great many different tasks. The high levels of precision and performance delivered by these environmental simulation chambers are put to good use during cyclical temperature tests.

    The dynamic climate chambers in the MKT series come with the proven APT.line™ preheating chamber technology, which ensures precise temperature values across the entire working area, even when chambers are fully loaded. They also feature a built-in powerful cooling unit with fast cooling down rates. Condensation protection can be programmed for samples, while four zero-voltage relay contacts can also be activated via the MCS controller. The environmental simulation chambers have a heated viewing window with LED interior lighting to ensure good visibility. Overall, the climate chambers offer an extensive range of programming options that allow them to be used extremely flexibly in line with the specific requirements in question.

     

    BINDER Environmental Simulation Chambers for Innovation and Precision

    The innovative technology of BINDER’s environmental simulation chambers is contained within premium housing insulation, which keeps the temperature of the housing consistently low and reduces noise levels during operation. The chamber interior, preheating chamber, and inner sides of the door are made from stainless steel, making them robust, durable, and easy to clean. A troubleshooting system with visual and acoustic alarms is also on hand to take care of safety.

    The dynamic climate chambers in the MKT series from BINDER combine innovative technology with ease of handling, and maximum precision and safety. The environmental simulation chambers meet the high standards for industrial material testing as well as aging and stress tests, far exceeding the possibilities offered by standard heating chambers and proving ideal for a wide range of tasks. The climate chambers are available in different versions with interior volumes offering varying capacities.

  • Binder – Growth Chambers – Series KBW – Growth chambers with light

    The BINDER climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this growth chamber to create constant lighting and temperature conditions.

    Key Features

    • Patented lighting system ensures homogeneous light distribution
    • Flexible positioning of illumination cassettes, three different light spectra, individually selectable
    • Integrated weekly program in real-time

    Climate Chambers with Light for Ideal Growth Conditions

    Climate chambers with light from BINDER provide the ideal growth conditions for plants and other organisms. Homogeneous light distribution encourages growth, as does the constant temperature inside the climate chambers. Natural growth conditions are replicated perfectly in the climate chambers in the KBW series from BINDER.

    Alongside light in combination with a constant temperature, BINDER climate chambers with light also offer a state-of-the-art humidity control system. Air can flow uniformly within the units, even when they are fully loaded.

     

    Climate Chambers with Light for Unique Homogeneous Light Distribution

    The climate chambers operate within a temperature range of between 0 °C and 70 °C, and are equipped with several illumination cassettes that can be positioned variably and have fluorescent tubes that can be adjusted in increments. This patented light system enables unique homogeneous light distribution over the entire usable area of the growth chambers.

    On that basis, BINDER climate chambers with light provide optimum growth conditions for plants and insects. They also make for practical, robust, and reliable units within the cosmetics and packaging industries as well as in hospitals. The growth chambers have controllers featuring interval and real-time programming, making them incredibly easy to use and offering the option of individual adjustments to suit any laboratory requirements.

    BINDER climate chambers with light come with the »Made in Germany« seal of quality. Suitable even for challenging laboratory tasks, they are characterized by a robust and durable quality, safety, and reliability.

  • Binder – Growth Chambers – Series KBWF – With light and humidity

    The BINDER climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this climate chamber to create constant lighting and temperature conditions.

    Key Features

    • Patented lighting system ensures homogeneous light distribution
    • Flexible positioning of illumination cassettes, three different light spectra, individually selectable
    • Pressure humidification with fast response times

    Climate Chambers with Light and Humidity for Perfect Climate Simulation

    Climate chambers with light and humidity from BINDER provide ideal growth conditions for plants and other organisms. The growth chambers in the KBWF series have been designed to allow light, humidity, and temperature to be set so as to simulate natural conditions. The temperature can be adjusted with the accuracy of a tenth of a degree between the range of 0 °C to 70 °C, while the humidity can be displayed accurately at increments of a tenth of a percent. The humidification and dehumidification system is controlled by a reliable microprocessor and humidity is regulated with a capacitive humidity sensor and steam humidification. Extensive program controls allow climate conditions to be simulated constantly and very accurately, even over extended periods of time.

     

    Climate Chambers With Light and Humidity for a Wide Range of Tasks

    The KBWF series growth chambers come with illumination cassettes as standard – they can be positioned variably and each have five daylight fluorescent tubes.

    Plant growth tubes with the ideal spectrum for photosynthesis are available as an option for simulating perfect climate conditions within plant biotechnology, the timber and forestry industry, and the agricultural industry. The climate chambers with light and humidity are also suitable for use within the pharmaceutical and chemical industry, for basic research in quality assurance, and for material testing.

    Climate chambers with light and humidity from BINDER are extremely user-friendly as well as guaranteeing constant and accurate performance. The units come with an LCD color monitor and a controller featuring interval programming.

  • Binder – Safety Drying Chambers – Series FDL – For limited quantities of solvent

    The BINDER FDL 115 with silicone and dust-free inner chamber, as well as symmetric airflow dries specimens containing solvents and thus this safety drying oven meets all EN 1539 requirements.

    Benefits

    • Safety concept meets the DIN EN 1539-2010-08 standard
    • Short drying time with high temperature accuracy and defined ventilation
    • Silicone free and dust-free inner chamber
    • Replaceable fresh air cartridges are easy to change and ensure constant fresh air quality

    Drying Chambers for Limited Quantities of Solvent

    BINDER safety drying chambers are extremely accurate and ensure that drying is quick and even. With the option of operation at temperatures ranging up to 350 °C, these drying chambers can meet different requirements and are suitable for a wide range of applications. In its FDL series, BINDER has developed drying chambers for limited quantities of solvent, which provide the ideal environment for all samples containing solvents.

    The FDL series includes drying chambers with a highly efficient filter cartridge and symmetrical air flow with defined flow rates. The cartridge can be replaced, guaranteeing high levels of operational safety along with the electronic fresh air monitoring system. The drying chambers operate with absolute temperature accuracy, even with high ventilation, thereby providing the basis for high-quality results and reproducible tests. The patented APT.line™ preheating chamber technology ensures that temperature distribution is homogeneous inside the drying chambers and test conditions are consistent across the entire usable space, regardless of the amount or size of the sample.

     

    Drying Chambers with Maximum Safety Levels and Ease of Handling

    BINDER drying chambers in the FDL series are the combination of maximum operational safety and consistent, reliable test conditions with ease of operation. Heat dissipation is minimal thanks to the chambers’ 60-mm-thick insulation and the tight housing door is fitted with a 2-point door closure. The entire chamber interior is made of stainless steel, allowing the usable space to be cleaned thoroughly in no time. This is also helped by the fact that there are no built-in fixtures, as BINDER drying chambers are equipped with two chrome-plated racks instead.

    The safety drying chambers in the FDL series are the number one choice for samples containing solvents.

  • Binder – Standard-Incubators – Series B Classic.Line – With mechanical adjustment

    With the B series incubator, you get a reliable and powerful unit in a solid configuration at a very attractive price.

    Benefits

    • Safe and reproducible results even under high batch throughputs in long-term operation
    • Inner glass door for a stable atmosphere

    Incubator with Mechanical Adjustment for Optimum Incubation

    The BINDER B series features incubators with mechanical adjustment. The high quality standards and technical equipment make these incubators a fantastic solution for stable incubation processes, allowing optimum incubation of microbiological cultures and delivering reproducible results even under high batch throughputs in long-term operation.

    The BINDER incubator with mechanical adjustment operates within a temperature range that can be set between 30 °C and 70 °C, and the chamber is fitted with a hydraulic/mechanical thermostat and two chrome-plated racks. The incubator inner door is made from tempered safety glass, guaranteeing a stable atmosphere.

     

    Incubator with Mechanical Adjustment for a Reliable Solution

    With the Classic.Line, BINDER has a whole range of incubators alongside the incubator with mechanical adjustment, including the BD series incubators with natural convection and the BF series incubators with forced convection. Whichever BINDER incubator you choose, you can be sure you will be getting a safe and reliable solution for your incubation processes.

    The incubator with mechanical adjustment is manufactured in BINDER’s own plant in Germany – just like all of the company’s other incubators. They all have an impressively robust »Made in Germany« quality, combining state-of-the-art technology with precision.

  • Binder – Standard-Incubators – Series BD Avantgarde.Line – With natural convection

    The BD Avantgarde.Line series is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media. The new design of the units and the homogeneous temperature distribution ensure the very best results.

    Benefits

    • Excellent temporal and spatial temperature accuracy
    • High process reliability
    • 100 °C disinfection routine

    Incubator with Natural Convection from BINDER

    If you are looking for stable incubation processes guaranteed, you need look no further than incubators from BINDER. Series BD incubators function with natural convection and, thanks to their state-of-the-art technical equipment, are a reliable choice for the incubation of microbiological cultures.

    This BINDER incubator with natural convection comes in a range of versions and sizes. Operating within a temperature range of between 5 °C and 100 °C, they are equipped with the proven APT.line™ preheating chamber technology and an adjustable exhaust air flap. The inner door is made from tempered safety glass, guaranteeing a stable atmosphere.

     

    Incubator with Natural Convection for Optimum, Reproducible Results

    This BINDER incubator with natural convection is really easy to use thanks to the controller with timer functions and the visual temperature alarm. The units can be stacked on top of one another for an optimum ratio between stand space and usable space.

    Plus, compared to similar incubators, the units from BINDER boast high levels of temperature accuracy, excellent usability, and options for ease of cleaning. The incubator with natural convection guarantees results that are reproducible at any time, with uniform incubation conditions even under high batch throughputs in long-term operation. These incubators are ideal for all incubation processes within the fields of research, production, and quality assurance.