Using with sealing film to make the sealing film fit better with the PCR plate.

Nest PCR sealing film can be used with both Elisa plates and PCR plates. The film can minimize the solution evaporation even under high temperature.

Both common and advanced films are available.

• Compatible with most thermal cyclers and real-time PCR machine
• Extra-thin walls provide the optimal thermal transfer and shorter cycle times
• Easy open leak proof cap makes the loss of reaction less than 5%
• Free of Dnase and Rnase, human DNA and PCR inhibitor
• Autoclavable

• Flat transparent surface
• Numeric mark on the bottom for easy identification
• PA/PE packaging
• Vent for gas exchange
• Stackable for easy storage and handling
• Sterilized by E-Beam, SAL=10-6
• Non-pyrogenic

Made from medical grade PP and manufactured in ISO 8 grade cleaning room. With precision mould and professional injection skill, Nest tips has smooth inner surface which is very important to ensure accurate results during liquid handling.

Key Features

• Both tips and boxes are autoclavable
• Low liquid attachment
• Resistant to organic solvents
• Clear Graduation for observation
• Boxed tips are DNase/RNase free, endotoxin and pyrogenic free
• Nest pipette tips are compatible with most of the popular pipettes on the market.
• Boxed tips are sterilized by E-beam, bagged tips are non-sterilized.

Made from high clarity polystyrene.

• Individually wrapped
• Edged color-coded band for identification
• Negative graduations for extra volume
• Sterilized by E-beam
• Non-pyrogenic, non-cytotoxic and non-haemolytic
• DNase/RNase free
• Polyolefin fiber filter to reduce contamination

Automated Cell Culture Analyzer With Maintenance-Free Chemistry Sensors

BioProfile FLEX2 combines Nova’s groundbreaking MicroSensor™ Card technology with optical measurement and freezing point osmometry for an automated and comprehensive cell culture analyzer that eliminates chemistry sensor maintenance, increases analyzer speed, and reduces sample volume. The full 16 cell culture test menu includes: Gluc, Lac, Gln, Glu, NH4+, Na+, K+, Ca++, pH, PCO2, PO2, total cell density, viable cell density, viability, cell diameter, and osmolality.

Compared to the previous generation BioProfile FLEX there is no maintenance for any of the 11 chemistry and gas sensors, sample volume for the full test menu is reduced by 75% to 275 microliters, and testing time is reduced to just 4.5 minutes. Automated sampling from 96-well plates, syringes, or a 24-position external “load-and-go” sample tray provides maximum workflow flexibility and efficiency for cell culture monitoring.

Biological nanoparticles such as extracellular vesicles (EVs), exosomes, viruses, or virus-like particles are a rapidly growing area of research in the life sciences and nanomedical field. The rapid in vitro measurement of multiple physical parameters such as size, concentration, surface charge, and phenotype characteristics is the special feature of the Particle Metrix ZetaView®.

Nanoparticle Tracking Analysis (NTA) captures the Brownian motion of each particle in the video. Based on the different diffusion movements of large and small particles in the surrounding liquid, the hydrodynamic diameter of the particles is determined. Furthermore, the charge state of the particle surface (zeta potential) can be measured via the movement of the particles in an applied electric field.

Pattern parameters, such as intensity fluctuations, surface geometry and shape of the particles as well as particle concentration are documented at each recording and can be used to distinguish sub-populations.

All these analyzes are carried out quickly and statistically reliably as required in the scattered light or fluorescence mode.

Pestles for 1.5ML micro centrifuge tube are ideal for protein and DNA resuspension as well as grind of soft tissue. -Made of high quality plastic,high hardness, wear resistance -Handle special process design, ease grip -Sterilized by gamma irradiation -Individually wrapped -Non-pyrogenic and DNase/RNase-free

The San Series of Automated Wet Chemistry Analyzers also known as Continuous Flow Analyzers have been designed as modular systems to meet the needs of laboratories that process a few samples or large volumes of samples. Based on the Continuous Flow Analysis (CFA) or also called Segmented Flow Analysis (SFA) technique, up to 16 analytical measurements (depending on the model) can be made on a single sample simultaneously. With the addition of rinsing valves and software the San Series of analyzers can automate; start-up, shut-down, dilutions, re-runs, clean-up, and raw data storage

The BluVisionTM is specially designed for environmental labs that have a wide variety of sample types and matrices for analysis. The Skalar discrete analyzer automates the sample & reagent pipetting into the cuvettes, mixing, heating and measuring of the reaction product.

The SP2000 analyzers automate all manual handling steps in the procedure of an application such as sample dilution, capping / de-capping, liquid handling, mixing, addition of reagents etc. Skalar has automated the following applications:

• Biochemical Oxygen Demand (BOD)
• Chemical Oxygen Demand (COD) according to ISO 6060
• Test kit applications including ST-COD according to ISO 15705, pH, Conductivity (EC), Alkalinity, Acidity, Hardness, Carbonate / Bicarbonate and other titrations, Turbidity and Color, Ion Selective Electrode (ISE) measurements
• Particle size distribution analysis in soil
• Bitterness and other parameters in beer/wort
• Sample preparation techniques (filtration, distribution, pipetting etc.)

The Formacs SERIES Total Organic Carbon (TOC) and Total Nitrogen (TN) analyzers have been designed to measure TOC and TN separately or simultaneously in liquid samples.

The flexible design ensures optimal performance and is operational within minutes, providing accurate analyses for Total Carbon (TC), Total Inorganic Carbon (TIC), TOC, Non-Purgeable Organic Carbon (NPOC), and TN. As an additional option, the concentration of Nitrate and Nitrite (NN) can be measured which results in a true alternative to the Total Kjeldahl Nitrogen (TKN) method (TKN = TN – NN). This eliminates the need for hazardous reagents, which are required for the conventional TKN analysis. In this way, valuable operator time is saved and better precision is achieved.

The user-friendly analyzers allow quick and easy access to all components and include a versatile software package for complete instrument control, data acquisition, calculations, and report generation.