Hielscher Ultrasonics – Laboratory Ultrasonic Devices

  • AUSTRALIA

    DKSH Australia Pty Ltd
    1 Beyer Road
    3195 Braeside VIC
    Australia

    1800 010 114 (hotline)

    Email

  • Hielscher-Brochure-Lab


Ultrasonic Laboratory Devices

Hielscher ultrasonic laboratory devices are compact, easy-to-use and extremely versatile. They can be used for the processing of a variety of organic and inorganic materials in a wide range of volumes. Typical applications of ultrasonic homogenizers include sample preparation, disintegrating and cell lysis, homogenizing, dispersing and disaggregation, particle size reduction and the acceleration of chemical reactions (sonochemistry). Hielscher offers a wide range of ultrasonic homogenizers to be used for these applications in a wide range of volumes from approx. 50µL to 2000mL. The selection of the ultrasonic processor depends on the sample volume to be sonicated. The table below, lists all laboratory devices and the recommended volume respectively.

Designed for the Lab

Hielscher ultrasonic laboratory devices are designed for the lab. They are very simple to setup. The handheld and standmounted devices combine generator (power supply) and transducer (converter) in a single housing. This saves desktop space and weight. Hielscher is the only manufacturer of handheld ultrasonic processors. The only plug to be connected is the main power plug, that fits into standard 115V~ or 230V~ outlets. The operation of the ultrasonic homogenizers is very simple. The devices are tuned to the optimal resonant frequency automatically, so there is no need for manual adjustments. The ultrasonic amplitude is adjustable from 20 through 100%. Alternatively to the continuous operation a cycle of intense sonication bursts can be a adjusted, e.g. for the sonication of heat-sensitive tissue.

Accuracy for Reproducible Results

For the preparation of samples as well as for the development of new applications, it is important to have a good control over all sonication parameters in order to obtain reproducible results. Hielscher ultrasonic devices allow you to control the amplitude of sonication. This is the most important sonication parameter. The mechanical amplitude is monitored constantly in the device to eliminate any deviation from the adjusted value. This makes the amplitude independent of other factors, such as immersion depth, liquid temperature or viscosity. Therefore, you can repeat each sonication by selecting the same amplitude again. Probe-type ultrasonicator UP200St Information Request Name Email address (required) Product or area of interest Note our privacy policy. Request information VialTweeter for indirect sonication.

Flow Cell Reactors for Larger Volume Processing

Hielscher ultrasonic laboratory devices can run continuously – 24hrs/7days, if needed. By using the laboratory devices in combination with flow cell reactors, you can process larger sample volumes. In this case, the liquid is pumped into the reactor made of glass or stainless steel. For example, a UP400St can process approx. 10 to 50 liters per hour. There it is exposed to defined intense sonication before it reaches the exit of the reactor cell. In order to cool heat-sensitive material during sonication, the flow cells are jacketed to improve heat dissipation.

Sound Protection Boxes for Noise Reduction

When applied to liquids, ultrasound causes cavitation. The cavitational noise is in the human audible range. Sound protection boxes are available for the ultrasonic laboratory devices to reduce the noise emission to more convenient levels. This is recommended for typical laboratory environments. The sound protection boxes include a stand pole and an adjustable table (acrylic glass) to hold the sample. 

Available Models

Technical Specifications 

Power [W]50
Freq. [kHz]30
TypeHandheld / Standmounted
Volume [mL]0.01 – 250

Compact Lab Homogenizer

The ultrasonic processor UP50H is typically used for the sonication of small lab samples. This homogenizer allows for the handheld or stand-mounted emulsification, dispersing, dissolving or cell disruption. The ultrasonic processor UP50H (50 watts, 30kHz) is the smallest model of our aesthetic laboratory devices, that are only supplied by Hielscher Ultrasonics in that compact form. The UP50H is used in particular in medical, biological or chemical laboratories, where small volumes need to be sonicated. Application fields are found mainly in the analytical field with applications such as the disruption of tissues, the cracking of bacteria or the homogenizing of samples in the food industry.

Technical Specifications 

Power [W]50
Freq. [kHz]30
TypeHandheld / Standmounted
Volume [mL]0.01 – 500

Compact Ultrasonic Laboratory Device

The ultrasonic processor UP100H (100W, 30kHz) is the perfect device for the sonication of small and medium size lab samples. This compact, yet powerful, lab homogenizer is commonly used for sample preparation, such as emulsifying, dispersing, dissolving and cell disruption. The ultrasonic processor UP100H (100 watts, 30kHz) has the same compact and ergonomic design as the UP50H (50 watts, 30kHz) but it comes with twice the ultrasonic power. At 1.1kg, it is lightweight in the hand. Of course, an operation at a stand is possible, too. The ultrasonic generator and the transducer are combined in one unit, so that there are no hassles with connecting cables. One power supply cable – that’s all.

Technical Specifications 

Power [W]200
Freq. [kHz]26
TypeHandheld / Standmounted
Volume [mL]0.1 – 1000

Handheld Ultrasonic Homogenizer

The UP200Ht (200W, 26kHz) handheld homogenizer is part of the new series of Hielscher’s 200 watt ultrasonic homogenizers which come with broad range of new accessories. The new features include digital control and touch screen, automatic data recording, intuitive operation and ergonomic and shapely design for the most user-friendly use and working comfort. The device functions and the various accessories allow for different applications and the coverage of very wide parameter configurations. Typical applications for this powerful ultrasonic device are homogenization, dispersing, emulsification, disintegration, cell disruption, degassing or sonochemistry. Hielscher designed this new 200W portable homogenizer to give the user a high flexibility, ease of use and a new level of accuracy and control.

Technical Specifications 

Power [W]200
Freq. [kHz]26
TypeStandmounted
Volume [mL]0.1 – 1000

Powerful Ultrasonic Lab Homogenizer

With the UP200ST (200W, 26kHz), the serial of Hielscher’s 200 watt ultrasonic devices is expanded by a very flexible and versatile unit. The new UP200St consists of a separated transducer UP200St-T and generator UP200St-G. Thereby, this sibling unit of the UP200Ht is perfectly suitable for the use in demanding environments. Equipped with a colored touch screen, integrated LEDs for sample illumination, pluggable temperature sensor, integrated SD-Card for data record, and many other features, the UP200St turns into a user-friendly and reliable tool for efficient and precise sonication.

Technical Specifications 

Power [W]400
Freq. [kHz]24
TypeStandmounted
Volume [mL]5.0 – 2000

Powerful Ultrasonicator

With the UP400ST (400W, 24kHz), the serial of Hielscher’s digital ultrasonic devices is expanded by a powerful 400 watts ultrasonicator. The new UP400St is the successor of UP400S – one of Hielscher’s most popular lab systems. Its high ultrasound power and robustness make the UP400ST perfectly suitable for the use in demanding environments. Equipped with a colored touch screen for easy controllability, integrated LEDs for sample illumination, pluggable temperature sensor, integrated SD-Card for automatic data recording, as well as many other features, the UP400ST convinces by its user-friendliness and reliability. The UP400St is ideal for efficient and precise sonication of larger samples.

Technical Specifications 

Power [W]200
Freq. [kHz]26
TypeStand-alone
Volume [mL]0.5 – 1.5

UP200ST with VialTweeter for Simultaneous Sample Preparation

In laboratories, it is often necessary to prepare multiple samples simultaneously at the same process conditions. The VialTweeter enables for the simultaneous sonication of up to 10 vials at the same intensity. Thereby, the VialTweeter is a reliable lab homogenizer for homogenization, emulsification, dispersing and deagglomeration, extraction, lysis, dissolve, as well as the degassing of fluids. Due to the principle of indirect sonication, no probe is immersed into the sample so that cross-contamination and sample loss is completely avoided.

Technical Specifications 

Power [W]200
Freq. [kHz]26
TypeContamination-free flow cell
Volume [mL]

Ultrasonic Inline Micro-Reactor

The GDmini2 is an ultrasonic micro-reactor for the indirect, temperature-controlled sonication of liquid media. Applications include: Homogenization, emulsification, particle synthesis, solvent extraction, cell lysis and fragmentation. The GDmini2 is an ultrasonic homogenizer in the shape of a straight glass tube. It homogenizes, disperses, disrupts cells or emulsifies liquids that flow through the glass tube. It can be used as an inline reactor for single-pass or recirculated ultrasonic processing. 

This is a unique and easy-to-use design. By coupling intense ultrasonic vibrations to the glass tube, the tube walls vibrate ultrasonically and therefore sonicate the liquid flowing through the tube. It is much more intense, uniform and consistent that an ultrasonic tank.

Technical Specifications 

Power [W]250
Freq. [kHz]24
TypeLaboratory sieving system
Volume [mL]

Ultrasonic Sieving in the Laboratory

The ultrasonic processor UIS250L is used for the acceleration of sieving processes alternatively or complementary to the classical low frequency vibrators. Especially in case of very fine powders ultrasound is often the only possibility to enable the sieving process at all.

Ultrasonic Laboratory Ring Sieve

Hielscher Ultrasonics has developed a worldwide unique technology especially for exciting common laboratory ring sieves (according to DIN ISO 3310/1 or ASTM E 11-95) with diameters of 200mm or 8 inch. A ring sonotrode that fits the sieve is excited by the ultrasonic processor UIS250L. The ring sonotrode (RIS) transmits the oscillation via the sieve frame to the screening surface. With the help of the clamping fixtures the neighboring sieves are also excited. In contrast to the ultrasonic sieving processes known until now, in which each sieve needs its own ultrasonic excitation, this is a very inexpensive and flexible solution.

Another advantage of this exciting principle is that the transducer is situated outside the material to be sieved. This technology can be used for dry or wet sieving, as well as for cleaning the sieves. The ultrasonic components can be retrofitted in already existing sieving towers and can even be used in combination with vibrators. In this case the delivery scope consists only of the ultrasonic processor UIS250L and the ring sonotrode, which will be fitted into the common laboratory ring sieves of most manufacturers. 

Technical Specifications 

Power [W]200
Freq. [kHz]26
TypeStand-alone
Volume [mL]30-500

UP200St_TD SonoStep: Sample Preparation Unit

The 200 watts ultrasonic device UP200St_TD offers a broad versatility as this basic unit allows for three completely different setups. The basic system consists in the top-down transducer UP200St_TD that is driven by the 200 watt generator (UP200St-G) suppling the electrical energy for various ultrasonic applications such as dispersing and deagglomeration, sample preparation, and deaeration. One basic ultrasonic system with three setup possibilities:

  • Ultrasonic CupHorn Ultrasonic
  • Flow-Cell Reactor
  • SonoStep sample preparation unit

UP200St_TD SonoStep: Sample Preparation Unit

Small Volume Processing & Sample Preparation before Analysis: Sonication, Stirring and Pumping with one device. 

Technical Specifications 

Power [W]200
Freq. [kHz]26
TypeCupHorn, sonoreactor
Volume [mL]10 – 200

UP200_TD CupHorn

In combination with the accessory TD_CupHorn, the UP200St_TD turns into a powerful ultrasonic cup horn. The cup vessel comes with an additional vial holder for sonication of up to 5 eppendorf tubes. The cup horn can be used as high intensity ultrasonic bath for direct and indirect sonication. Whilst the sample is filled directly in the cup horn for a direct sonication, the cup horn is used as an ultrasonic water bath for indirect ultrasonication. With the vial holder, up to 5 sealed vials (e.g. Eppendorf tubes) can be processed avoiding aerosols and cross contamination. Therefore, the ultrasonic cup horn is the perfect tool to sonicate sterile or pathogenic samples. It allows for the simultaneous sonication of multiple tubes under identical process conditions.
 

UP200_TD Flow-Cell Reactor

With the flow cell attachment, the UP200St_TD functions as a small scale recirculation setup for the ultrasonic processing in a continuous flow-through mode. The UP200St_TD FlowCell is equipped with 2 feed ports of 2.5mm inner diameter. The reactor can be closed with a lid to ensure a closed process environment.

Advantages of the UP200St_TD:

Performance:

  • Consistent sonication with up to 200 watts for sample preparation.
  • Mixing, Dispersing and Deagglomeration as well as Deaeration by powerful ultrasonic forces
  • No sample loss, no cross-contamination

Efficiency:

  • Effortless sample preparation by simple setup and operation of one device

Flexibility:

  • Versatile basic unit allows for three different setups
  • Simple setup and operation
  • Simple quick-lock for fast and easy changing of the attachments (SonoStep, FlowCell, CupHorn)
  • Quick-lock mechanism for fast and simple cleaning
  • Simply exchangable hose or pipe connections

Key Industries

  • Aerospace
  • Agriculture
  • Automotive
  • Biopharmaceutical and Biotechnology
  • Chemical
  • Construction
  • Cosmetics & Personal Care
  • Defense
  • Die & Mould
  • Education & Academics
  • Electronics
  • Energy
  • Environmental
  • Food & Beverage
  • Machinery & Manufacturing
  • Medical
  • Mining & Minerals
  • Oil & Gas
  • Optical
  • Paper & Wood
  • Pharmaceutical
  • Polymers, Plastics and Rubbers
  • Powders & Pigments / Coating
  • Railway
  • Semiconductor, Solar & Electronics
  • Service
  • Textile
  • Wholesale & Retail

Brand

Hielscher Ultrasonics

Hielscher Ultrasonics is a family owned business, located in Teltow near Berlin (Germany). The main emphasis of its activities is the conception, development and production of ultrasonic devices for the use in laboratory and for manifold industrial applications. Technological innovations together with the realization of new ultrasound based processes substantiated the company growth and its market acceptance. Today, ultrasonic devices made by Hielscher Ultrasonics are being used in laboratories and production plants on all continents across the world. Hielscher Ultrasonics integrates the ultrasonic devices into complex ultrasonic systems, such as wire cleaning systems, too. The systems are produced to meet the customers requirements in terms of power, extended range of accessories and steady state proof equipment. Hielscher Ultrasonics is committed to providing innovative ultrasonic processing solutions that enable our customers and partners – the leaders in their field – to deliver superior or radically new products and services.

test block for Laos

Your download – just a few steps away

Please enter your details here:

test

Contact us

Contact us